What is my personal experience with S400 vs X100? Because X100 kept my flight in the short irons low, I liked them. Although I’m not sure if I still have their back for them, that is a different story. However, I preferred X100 in the short irons more than the long irons (4i, 3i…not that I liked the 3i with anything).
I believe the S400 is a gram heavier than the X100. The X100s are different in that there is less space between the tip and the first step, which I assume makes the tip stiffer. I’ve used the S400s in a different set of irons, and I like them (even though I’m not sure I have the back for them at the moment.)
The short irons flew reasonably well, and the long irons were a little bit simpler to hit. As a result, I now prefer the S400s over the X100s. I’m not a fan of PX shafts, but if you have the chance to try them, I encourage you to do so because you never know.
Table of Contents
Dynamic Gold S400 specs.
All other iron shafts are compared to Dynamic Gold, which serves as the industry standard. It has been the most successful golf shaft in history and still rules the professional tours year after year. For players looking for a low, penetrating ball flight for maximum control and accuracy, Dynamic Gold is a tour-weighted shaft.
| Model | Weight | Length | Tip diameter | But diameter | Launch | Spin |
|---|---|---|---|---|---|---|
| Dynamic Gold S400 | 132 g | 41-37″ | 0.355″ | 0.600″ | Low | Low |
When flex is reduced, the Dynamic Gold Tour Issue does not sacrifice weight. As a result, there are two flexible shaft models that can be used with a wide range of golf bags and sets. The S400 shaft offers relief to players who prefer heavier shafts but do not wish to burden themselves with excessively stiff profiles.
Thanks to the Dynamic Gold Tour Issue line, Tour Only tolerances are finally accessible to the general public. Golfers who are serious about their game and set composition can rest assured that they are receiving ultra-premium products for their build.
Regardless of the type of iron shaft a player is using, DG Tour Issue is a fantastic alternative and should not be disregarded as a wedge option.
Is Dynamic Gold S400 stiff?
With a weight of 134 grams, the True Temper Dynamic Gold S400 golf shaft is a stiff shaft.
Dynamic Gold X100 specs.
For the most powerful players, the Project X shaft is a great alternative. High-velocity golfers frequently rely on Project X’s strapless design to give them more control over a penetrating ball flight.
The Project X steel shafts are a fantastic option for any player who places a high value on accuracy and precision because they are available in a variety of weights and flexes. The most aggressive players prefer Project X because of its unmatched stability.
- Brand-True Temper
- Flex-X-Stiff
- Ball Angle-Low
- Distance of tee? (Swing speed)-160+ m (90+ mph) – Iron 7
- Shaft Type-Iron
- Shaft Tip-0.355″
- Shaft Length-39.5″
- Material-Steel
- Color-Chrome
- Shaft Butt-0.600″
- Weight (g)-130
All other iron shafts are compared to Dynamic Gold Tour Issue as the Gold Standard. It has been the most successful golf shaft in history and still rules the professional tours year after year.
The tour-weighted shaft Dynamic Gold Tour Issue is made for golfers who want a low, penetrating ball flight for the best possible control and accuracy.
For the exacting performance requirements of the best players, our Tour Issue shafts have the tightest weight tolerance in the industry. Only available in a wedge shaft finish with a chrome or onyx finish.
Is X100 flex stiff?
Both shafts have a different flex, with the X100 being extra stiff and the S300 being stiffer.
Is X100 stiffer than S300?
The X100 golf shaft is stiffer than the Dynamic Gold S300. The stiffer shaft is crucial for golfers who swing the ball faster. Golfers will have a very difficult time obtaining the necessary accuracy without the shaft’s stiffness.
What flex are X100 shafts?
The shaft’s stiffness is an X flex, or an extra stiff flex, and the model is the X100.
S400 vs X100; Comparison.
Sincerely, I think the X100 is a good substitute for the S400. The S400 will feel a little smoother, but the X100 is a classic and doesn’t strike me as being excessively stiff. I use the X100s in my S55s and I soft-stepped some X100 AMT in my J15 CB.
I am in the 85 mph range with 6i. I use them for dispersion because the S300 and softer tend to make me lean left for no apparent reason. Even though the S400 only weighs a few grams more per shaft than the X100, I can feel the weight difference.
You probably don’t want to go to PX because the DG feel is much nicer in comparison and they tend to feel much stiffer (to me) in comparable flex ( I installed prosoft inserts in mine as well).
There are many options on eBay; unless you have your heart set on those 790s, you could probably buy a set of shafts there, have them put in your current irons, and then sell the Modus to cover the majority of the cost. I apologize for the rambling, but I believe the X100s would work just as well for you.
What is the difference between Dynamic Gold S300 and X100?
Weight-wise, the S300 and X100 are equivalent. Their butt and tip diameters are the same. The two shafts’ GENERAL stiffness is therefore the same. The tip stiffness makes a difference. The butt and tip of the X100 are softer. With the X100, the final result ought to be a slightly lower ball flight.
My preferred shaft for many years has been an X100. I’ve been experimenting with KBS shafts lately, but I can see myself going back to the tried-and-true DGs. Since I hit the ball pretty high and most other shafts balloon on me, I prefer the lower ball flight of the X100s over the S300s.
But it’s also not like the X100 generates a ball flight that much lower than the S300. Particularly if you soft-stepped them, I don’t think you would lose any ground.
Some related FAQs.
Is a shaft S300 stiff?
But it’s also not like the X100 generates a ball flight that much lower than the S300. Particularly if you soft-stepped them, I don’t think you would lose any ground.
Which is stiffer S300 or X100?
The X100 golf shaft is stiffer than the Dynamic Gold S300. The stiffer shaft is crucial for golfers who swing the ball faster. Golfers will have a very difficult time obtaining the necessary accuracy without the shaft’s stiffness.
Is S400 stiffer than S300?
A more flexible golf shaft will suit you better if your swing is slower. The S400 has an extra stiff option in this situation, and the S300 has a stiff option. As a result, the S300 is probably a better option if your swing is slower than the average or casual golfer’s (which is the majority).
Why do pros use S400 wedge shafts?
“The S400 has a softer feel. For quick shots around the green, it works well. Many Tour players use X100 in their irons and S400 in their wedges.
Discover the meticulous and expert-driven process behind our product reviews at Sportic Media. Our comprehensive guide, led by industry veterans, ensures you get the most reliable and detailed insights into golf equipment. Dive into our methodical approach by visiting How We Test Products at Sportic Media: A Comprehensive Guide
.
