The main difference between the double-bend putter and the single-bend putter is that “a head intended for a double-bend shaft cannot be reshafted with a single-bend shaft.
The shaft enters the head at a 90° angle to the ground on a double bend head. The shaft attaches to the head at an angle on a head designed for a single bend shaft. On a single bend putter, the “second bend” is on the head, not the shaft.”
So now you know what is the difference between the single and double bend putters. In this article, we discuss almost everything you need to know about the types of putters and their uses, advantages, and disadvantages. So stick around until the end.
What are the basics of single and double bend putters?
There are some characteristics that have been unique to those two kinds of putters. So here is the basic identification.
- Single bend putters.
Single bend hosels are a relatively new feature on putters. It’s the shaft, not the hosel, that’s bent.
The putter head is positioned behind the hands (offset), and the advantage over double bend variants is a neater appearance that is less likely to attract attention. Straight back and through strokes are recommended.
Single bend putter shafts are perfect for golfers who want a smooth putting stroke and don’t require much assistance with accuracy.
Because it has fewer moving parts and is easier to control, this sort of center shafted putter is more forgiving. In short, rapid putts, it’s also a touch more stable.
Because they enable golfers to keep their hands in a more neutral posture throughout the putting stroke, single bend putter shafts are more common than double bend putter shafts.
So generally the single bend putters are not very suitable for the beginners who are new to golf and have good accuracy, lining, and placement.
- Double bend putters.
The double bend positions the putter’s head behind the hands and aids in face balance. Hence, double-bend models are best for straighter strokes. The distinction between double and single bends is more about appearance than performance.
For mallets, the typical shaft/hosel setup is used. The shaft, rather than the hosel, is bent in single bends.
During the putting stroke, this design keeps the hands in a more neutral posture, which can aid in improving accuracy. Double bend putters are used by the majority of professional players because they allow for more torque on the ball, which helps you generate more power and control on your shots.
Who should use a putter with a double bend?
A double bend putter has a center shaft and two hosel bends. This putter is more stable than a single bend putter and can benefit players with uneven putting strokes. However, because the lie angle can alter your ball striking, it’s critical to get fitted for a double bend putter
So if you are a newcomer or a one with low accuracy and positioning ability, then the double bend putters can be ideal for you. In this case, you must choose the utters intelligently because you are playing a game, but not just getting fun and joy.
A double bend putter shaft may be suitable for you if you’re seeking a new putter shaft or want to test out a different style.
Players with smaller hands will benefit from double bend putters, as they allow a bit more give and make it simpler to grip the club.
A double bend putter shaft is the way to go if you want greater power and control from your putts.
Is single bend putters’ face balanced?
Yes, they are. Almost all the single bend putters are face-balanced. Face-balanced putters are made with single bend hosels. You have a face-balanced design if you hold your putter on the balance point and the face points directly to the sky.
The face of this putter resists twisting and prefers to remain square. As a result, single bend hosels might be a good fit for you if you have a tendency to miss putts to the left due to an over-rotation of the face.
What really is a face-balanced putter?
A putter is “face balanced” when the shaft is balanced on your finger or off the table or desk, and the putter’s face points straight up.
Golfers that use a straight-back/straight-through putting stroke choose face-balanced putters. The putter’s face balance keeps it from opening and closing too much throughout the stroke.
So when you are purchasing a new golf putter, make sure to check whether it is face balanced or not based on your desire.
Slant neck vs single bend putter.
What is a slant neck?
It resembles a plumber’s neck sans the elbow. The slight offset allows players to see the ball more clearly. This neck works well with a gated storke and has a quarter toe hang.
What is the difference between a slant neck and a single bend putter?
The Taylormade Spider X Slant Neck is made for players with a higher arc in their swing. If you’re going to use the putter inside on the way back and through, the Slant Neck version is the way to go.
It’s also worth noting that the slant neck style is far more popular than the S-bend style. It is preferred favored by most amateurs and is utilized by more professionals.
As the single bend putters bring comparatively more accuracy, then the slant neck will not gonna bring the same accuracy as expected. So the best thing that a one should do is, ask their coach or the instructor for the instructions before buying a new putter for playing.
If you have enough money to spend on putters, then buying both putters will help in choosing the best one for you with your own experience.
Double bend vs plumbers neck.
What exactly is a plumber’s neck?
A horizontal bend slightly below where the end of the shaft and the hosel meet defines the plumber-neck. This design, which has a modest degree of offset in general, does an excellent job of maintaining the hands ahead of the clubhead through impact.
What is the difference between a double bend and vs plumbers neck?
Double bends often have a 1/2 offset. Plumber’s necks are typically one full offset. It’s a personal preference for me. With the plumber’s neck, We can see more of the ball, allowing us to place the ball closer to the center of stance (one ball left of center) than with a double bend putter.
The difference between the two would be adjustability. Depending on the material, plumber neck putters would be simple to alter for loft and lie. I’ve had Scottys, and because they’re carbon steel, We can modify the lie with my foot. You can’t accomplish that with double bend putters since they don’t have a neck.
Once you’ve determined which of your eyes is dominant, you may pick the putter that looks best to you. The purpose of eye dominance and offset selection is to aid with alignment. Once that is determined, you must decide if you have a gate stroke or a straight back straight through stroke. This will further reduce your options.
Some related FAQs.
What is the best putter shape?
A putter with a balanced face assists the player to maintain a square putter face throughout the stroke. A toe-hang putter increases the golfer’s chances of putting with a consistent arc. A simple test can be used to determine if a putter is face-balanced or toe-hung.
Do PGA professionals use face-balanced putters?
Pro tour golfers employ a variety of putters, ranging from face balanced to toe hung in both mallet and blade designs. While several golfers, including Rory McIlroy and Jon Rahm, have used face-balanced putters on occasion, others, such as Phil Mickelson, swear by a toe-hanging blade.